- 30+ Mẫu bàn trà có ngăn kéo đa năng cho phòng khách tiện nghi
- Sofa gỗ là gì? Ưu nhược điểm của sofa gỗ so với sofa vải, sofa da – Dongsuh Furniture
- Cửa Nhựa Lõi Thép Vân Gỗ Và Bảng Báo Giá Chi Tiết Nhất
- Cơ hội mua ghế sofa nhập khẩu giảm giá lên tới 60% tại Nội Thất Xinh
- Làm Cửa Nhà Theo Phong Thủy Giúp Mang Lại Tài Lộc
Common mistakes of tempered glass doors Not everyone knows how to fix it. You think that if you buy at a high price, the durability will be high. However, not everything is kept good through long-term use, tempered glass door also. Here are some Common faults of tempered glass doors but Adoor (Adoor.com.vn) sum you should pay attention to know how to repair.
1. Common mistakes of tempered glass doors
1.1 Error of tempered glass door not closing
During use, the amount of oil is clogged, dry oil or during installation the opening and closing adjustment screw was screwed too tight.
How to fix
When the tempered glass door of your home encounters this problem. Then you should add more oil to the hinge or you just need to turn the adjusting screw counterclockwise to re-adjust the correct tightness for the screw.
1.2 Error when opening and closing the door but cannot return to the original position
Because in the process of closing (opening) the door, you have pushed beyond the maximum allowable angle of the hinge, causing the barrier in the hinge intestine to break, so the door cannot enter the correct position but deviate inward or outward.
How to fix it?c
When the tempered glass door encounters this error, the only way is to replace the hinge with a new one. Only then can we overcome the error of opening and closing the door that cannot return to the original position.
>>>> MORE: Sliding door accessories
1.3 The door is protruding into the ground – LOICommon problems of tempered glass doors
This is one of the Common faults of tempered glass doors best. This case occurs due to many reasons: It is possible that during the installation process, the installation technicians were not careful enough that the screws and hinges were not tightened. Some time after use, it loosened, causing the door to sag.
Or because the frequency of use is too great (especially doors used in public areas such as commercial centers, entertainment centers, hotels, restaurants, etc.)
Besides, it is also possible that the user does not regularly check and maintain the door when there is a problem. When opening/closing the door, using too much force, improperly… causing damage and affecting the life of the door.
How to fix
You should take hard and thick carton paper to prop the bottom of the sagging door so that when aligning it, you can avoid breaking the glass because they suddenly drop down. Next, remove the glass corner clip on the door from the glass clip.
After removing, use a screwdriver to re-adjust the screw inside the glass clamp, turn it clockwise to loosen it. Strongly lift the door as far as possible and then turn it counter-clockwise to secure the door.
If the hinge is misaligned, you can fix the sagging tempered glass door by very quickly and simply by removing the screw on the hinge. Remove the hinge’s stainless steel cover and then fix the screws.
1.4 Error of tempered glass door opening too fast or too slow
This is also considered one of the Common faults of tempered glass doors. So why do tempered glass doors often have this error?
Because during the construction process, the door speed was adjusted incorrectly. Leads to an involuntary opening or closing of the door and is inconsistent with the user’s thrust.
How to fix
You only need to adjust the speed of the door through a system of screws and hinges.
1.5 Door rattles and stops at 90 degree angle
- During construction and installation, the technical staff did not align the shaft correctly
- The glass clamp is not fully engaged with the door hinge shaft.
- Displaced by the horizontal axis of the hinge with the face of the hinge
- Installation of parts out of sync, sloppy
- Using an asynchronous accessory kit
How to fix
When the door is like this, you need to loosen half of the fixing screw of the lower clamp, paying attention to only half of it, not all the way. Then open and close many times so that the concave core of the clamp hugs the floor hinge shaft. If the center of gravity axis is deviated too much, the verticality should be adjusted. If the cause is the glass clamp, it is recommended to replace, attach, re-align the glass clamp or replace the glass clamp in sync with the floor hinge.
1.6 The upper clearance is too large, while the lower clearance is too small
There are 4 reasons why the tempered glass door shield has this error:
- The door is lowered from the original position
- Due to the floor hinge shaft being worn through the use process
- Glass clamp is misaligned or the base of the glass is protruding from the glass clamp
- Door hinge buried in the ground for too long
How to fix
Depending on the type of cause, there will be suitable solutions. You should replace the new hinge or reinstall the glass clamp to ensure that the clamp edge is aligned with the 2 corner faces of the glass. If the door hinge is buried in the ground for too long, a new real hinge should be installed on your door.
1.7 Tempered glass door is drifting door travel
When used for a long time, but the tempered glass door is not checked regularly, there will be some phenomena: running out of oil, dry oil, rusted glass door hinges, … Leads to the ability to pull and hold the door. weaker. This will cause the glass door to drift. This is Common faults of tempered glass doors during long-term use.
How to fix
Adjust the oil of the tempered glass door hinge, replace the rusted screws. Adjust the floor hinge position by removing the hinged stainless steel cover and adjusting the hinge to its position. At the same time, you must fix the hinge fixing screws.
1.8 Tempered glass door lock is stuck and cannot be opened
- The first reason is that the lock has not been cleaned and maintained for a long time, so it is rusted inside.
- The key is worn and rusted, so the door lock is stuck
- The tempered glass door is jacked, causing the lock to jam the latch and not turn the latch up.
- The last cause is due to too much external force causing the lock to be damaged. Or because the lock is glued by children or small foreign objects are inserted into the lock.
How to fix
Depending on the case, we will have different treatment plans. If the lock has been rusted for a long time, you can use RP7 spray with cleaning tools to clean the lock.
>>>>> See more: Revealing Useful Information About Wood Frame Tempered Glass Doors
2. Experience in fixing common errors of tempered glass doors
2.1 Safety glasses with flexible backing are recommended in all areas
It is a type of glass that combines two or more panes of glass bonded together by a flexible film. This lining has good durability and adhesion. When broken, glass crumbs will stick to this film. Limit splashing, reduce the risk of damage.
This type of glass also has many advantages such as increased sound insulation, saving electricity consumption of electrical equipment. In terms of price, tempered glass with film is almost twice as expensive as non-filmed glass. However, you should think about the safety of your family if you are wondering about the price.
2.2 Tempered glass thickness of 8mm or more
Depending on the installation location, the glass needs to be of the right thickness. Homeowners limit the use of very fragile 5mm glass. For fixed areas where large format glass is required, you should choose a thickness of 10mm. For open and closed doors, the glass thickness is about 8mm, making it easy to operate.
2.3 Do not use tempered glass in high places
No matter what type or quality, glass has a certain lifespan. In addition, the surrounding influences such as temperature and weather all affect the durability of the glass. When the overhead glass breaks, the shards falling directly will cause great danger.
To brighten the atrium, homeowners can switch to polycarbonate roofing sheets with transparency equivalent to glass, more durable and lighter, and can be bent. This product has good impact resistance. When buying, you should choose the type that has a warranty against fading, allowing the best light penetration for many years.
2.4 Make sure the gap around the glass is clear, and the hinges and handles are correct
During construction, many people fastened the four sides of the glass to make it more tight and beautiful. When there is a change of weather and temperature, the glass is pressed, leading to cracks and explosions due to expansion, this is one of the Common faults of tempered glass doors when installing
In addition, the weakest point of the glass is the surrounding edges, especially the corners. The hammer hitting the glass didn’t break, but hitting the edge had a different effect. When the accessories are installed incorrectly, the door will sag, and the impact can also cause cracks.
3. Summary of popular tempered glass door models today:
Below are some of the most popular models of tempered glass doors today. With a low price, but when installing these glass door models, your home becomes more luxurious and classier.
The above article has mentioned some Common faults of tempered glass doors and how to fix it. Adoor Hopefully, through this article, it will help you to repair yourself when the tempered glass door has an error without having to spend unnecessary money when hiring repair and support units.
==> Maybe You Are Interested:
Vote 5 stars for the article
Bạn Đang Xem: 8 Cách Sửa Lỗi Thường Gặp Của Cửa Kính Cường Lực